Products
Steel Truss & Space Frame

Product Category

Keep In Touch With Us

Steel Truss & Space Frame

Steel trusses and space frames for large roofs, galleries, pipe racks and stadiums. We fabricate, trial-assemble and mark every member so site installation is fast and accurate.
Welded trusses and bolted space frames, trial-assembled in the shop, with node systems to JG/T 10 and JG/T 11 and installation checked against JGJ 7-2010.

Trusses and space frames are the standard answer when a roof has to span 30 m or more without columns. The structure is efficient, but it is also the part of a steel package where quality is hardest to see: an undersized tube wall or a bolt that was never tightened looks exactly like a good one from the ground.

We fabricate welded trusses and bolted space frames, trial-assemble them, and supply the tightening and inspection records with the shipment.

Key Specifications

Span 20 – 120 m
Truss types Parallel chord, tapered, triangular, vierendeel
Space frame nodes Bolted sphere (JG/T 10), welded hollow sphere (JG/T 11), cast steel (GB 7659)
Bolts High-strength bolts to GB/T 16939
Measured deflection ≤ 1.15 × calculated (JGJ 7-2010 §6.11.3); for spans > 24 m measure the mid-span and both quarter points
Integral lifting Adjacent lifting point level difference ≤ spacing/400 and ≤ 15 mm (jacks), or ≤ spacing/250 and ≤ 25 mm (strand jacks), per JGJ 7-2010 §6.7.3

Checks that catch the usual problems

  • Wall thickness of every tube batch is measured on receipt and recorded; substituting a thinner wall is the most common shortcut in the space frame market.
  • Bolt tightening is done with a calibrated torque wrench and every tightened bolt is marked with paint; a sample is re-checked after erection.
  • The frame is trial-assembled in the shop in modules that fit transport, so the site geometry is confirmed before shipment.
  • Welded nodes are UT or PT inspected according to the execution class; cast nodes come with a mill certificate and a casting inspection report.

Transport and site assembly

Space frames ship as members and nodes in crates, or as pre-assembled panels where a crane can handle them. Trusses ship in two or three pieces with bolted splices. The erection drawing shows the sequence and the temporary bracing, which is removed only after the permanent bracing is complete.

Span 20 – 120 m
Eave Height Truss depth 1 – 8 m
Structure space-frame
Main Material Q355B H sections and tubes, bolted sphere nodes JG/T 10, welded hollow spheres JG/T 11
Application Roof truss, space frame roof, conveyor gallery, pipe rack, stadium roof

What span can a steel truss or space frame cover?

Spans are 20 to 120 m. Trusses can be parallel chord, tapered, triangular or vierendeel.

Which node types are used for space frames?

Bolted sphere (JG/T 10), welded hollow sphere (JG/T 11) and cast steel (GB 7659), with high-strength bolts to GB/T 16939.

Why is quality hard to see in trusses and space frames?

An undersized tube wall or a bolt that was never tightened looks exactly like a good one from the ground.

What records come with the shipment?

We trial-assemble the trusses and space frames in the shop and supply the tightening and inspection records with the shipment.