Steel structure manufacturer since 2009 · 8 fabrication bases in China
Product Category
Keep In Touch With Us
Steel Tower & Storage Tank Structure
Towers and tank structures are defined by wind and by access. The wind load grows with height and with the exposed area of the attachments — antennas, ladders, platforms and pipes — and the structure has to allow inspection and maintenance without scaffolding.
We fabricate lattice towers, tubular masts and tank support frames, with hot-dip galvanizing for outdoor service and a bolted site connection that does not need site welding.
Key Specifications
| Height | 10 – 80 m |
| Section | Lattice angle or tube, or tubular mast 500 – 2,000 mm |
| Plate thickness | 6 – 40 mm for tubular sections |
| Galvanizing | Hot-dip 85 – 120 µm, or C4/C5 paint system |
| Access | Caged ladder, rest platforms every 10 m, fall-arrest rail |
| Tolerance | Verticality H/1000, with the base levelled by grout after erection |
Wind and attachments
- The tower is designed for the antenna and equipment list declared at the start; adding dishes later without a check is the most common cause of overstress.
- Ice loading and the wind area of the ice are considered for cold-climate sites.
- A lattice tower is cheaper per metre of height than a tubular mast, but needs more land and more maintenance access.
Fabrication and erection
Tower sections are trial-assembled in the shop in 3–4 section lifts, match-drilled, and shipped with the bolted splice orientation marked. Erection is by mobile crane for shorter towers and by climbing derrick for tall ones.
| Span | 3 – 30 m plan dimension |
| Eave Height | 10 – 80 m height |
| Structure | other |
| Main Material | Q355B / Q345R plate, hot-dip galvanized lattice members |
| Application | Communication tower, water tower, process tower, silo support structure, tank farm |
What height can a steel tower or tank structure reach?
Height is 10 to 80 m. Sections can be lattice angle or tube, or a tubular mast 500 to 2,000 mm, with 6 to 40 mm plate for tubular sections.
What defines the design of towers and tank structures?
Wind and access. Wind load grows with height and with the exposed area of attachments such as antennas, ladders, platforms and pipes, and the structure has to allow inspection and maintenance without scaffolding.
How is the steel protected for outdoor service?
Hot-dip galvanizing at 85 to 120 microns, or a C4/C5 paint system.
What access is provided on the tower?
Caged ladder with rest platforms every 10 m and a fall-arrest rail. The site connection is bolted, so no site welding is needed.