Products
Steel Tower & Storage Tank Structure

Product Category

Keep In Touch With Us

Steel Tower & Storage Tank Structure

Steel towers, masts and tank support structures for telecom, water and process plants. We fabricate and protect each structure for its site exposure and ship it ready for assembly.
Lattice towers, tubular masts and tank support structures fabricated from plate and section steel, galvanized or painted to the exposure class.

Towers and tank structures are defined by wind and by access. The wind load grows with height and with the exposed area of the attachments — antennas, ladders, platforms and pipes — and the structure has to allow inspection and maintenance without scaffolding.

We fabricate lattice towers, tubular masts and tank support frames, with hot-dip galvanizing for outdoor service and a bolted site connection that does not need site welding.

Key Specifications

Height 10 – 80 m
Section Lattice angle or tube, or tubular mast 500 – 2,000 mm
Plate thickness 6 – 40 mm for tubular sections
Galvanizing Hot-dip 85 – 120 µm, or C4/C5 paint system
Access Caged ladder, rest platforms every 10 m, fall-arrest rail
Tolerance Verticality H/1000, with the base levelled by grout after erection

Wind and attachments

  • The tower is designed for the antenna and equipment list declared at the start; adding dishes later without a check is the most common cause of overstress.
  • Ice loading and the wind area of the ice are considered for cold-climate sites.
  • A lattice tower is cheaper per metre of height than a tubular mast, but needs more land and more maintenance access.

Fabrication and erection

Tower sections are trial-assembled in the shop in 3–4 section lifts, match-drilled, and shipped with the bolted splice orientation marked. Erection is by mobile crane for shorter towers and by climbing derrick for tall ones.

Span 3 – 30 m plan dimension
Eave Height 10 – 80 m height
Structure other
Main Material Q355B / Q345R plate, hot-dip galvanized lattice members
Application Communication tower, water tower, process tower, silo support structure, tank farm

What height can a steel tower or tank structure reach?

Height is 10 to 80 m. Sections can be lattice angle or tube, or a tubular mast 500 to 2,000 mm, with 6 to 40 mm plate for tubular sections.

What defines the design of towers and tank structures?

Wind and access. Wind load grows with height and with the exposed area of attachments such as antennas, ladders, platforms and pipes, and the structure has to allow inspection and maintenance without scaffolding.

How is the steel protected for outdoor service?

Hot-dip galvanizing at 85 to 120 microns, or a C4/C5 paint system.

What access is provided on the tower?

Caged ladder with rest platforms every 10 m and a fall-arrest rail. The site connection is bolted, so no site welding is needed.