Products
Structural Steel & Building Materials Supply

Product Category

Keep In Touch With Us

Structural Steel & Building Materials Supply

One-stop supply for contractors and local fabricators who need steel and envelope materials from one source. We consolidate, check and ship your full order in a single export load.
Supply of hot-rolled sections, plate, galvanized purlins, sandwich panels, roof sheets and fasteners, with mill certificates and export packing.

Not every customer needs a complete building. Some need the material: hot-rolled H sections, plate, purlins, panels and fasteners, delivered to their own fabricator or to site.

We supply structural steel and building materials with mill certificates, marking and export packing, either as a stand-alone order or as part of a building package.

Key Specifications

Sections Hot-rolled H, I, channel, angle; welded H on request
Steel grades Q235B, Q355B, Q355D; S235, S355 on request
Plate 6 – 100 mm, cut to size
Purlins C/Z, 1.5 – 3.0 mm, Z275
Panels Sandwich panel 50 – 200 mm, roof and wall sheet 0.4 – 0.8 mm
Certificates Mill certificate to EN 10204 3.1 for each heat
Packing Bundled by mark number, small parts in wooden cases

Traceability

Every heat number on the mill certificate can be traced to the member that was cut from it. Where the project requires EN 10204 3.1 certificates, the certificate pack is compiled against the shipping list and delivered with the documents.

Mixed containers

A single container can carry sections, purlins, panels and fasteners for one project, packed in the sequence the site will need them. The packing list is issued before shipment so the site can plan unloading.

Span Section range per product
Eave Height Length up to 24 m
Structure other
Main Material Q235B / Q355B hot-rolled sections, plate, galvanized purlins, panels, fasteners
Application Material supply, stockist order, component supply for local fabricators

Can I buy steel material without a complete building?

Yes. We supply structural steel and building materials as a stand-alone order, or as part of a building package, delivered to your fabricator or to site.

Which sections, grades and plate sizes are available?

Hot-rolled H, I, channel and angle sections, with welded H on request. Grades are Q235B, Q355B and Q355D, and S235 and S355 on request. Plate is 6 to 100 mm, cut to size.

Do you provide mill certificates?

Yes. A mill certificate to EN 10204 3.1 is supplied for each heat.

What purlins and panels can be included?

C/Z purlins 1.5 to 3.0 mm in Z275, sandwich panels 50 to 200 mm, and roof and wall sheet 0.4 to 0.8 mm. Everything is bundled by mark number and packed for export.