Products
Purlin, Stair & Industrial Platform

Product Category

Keep In Touch With Us

Purlin, Stair & Industrial Platform

Purlins, girts, steel stairs and access platforms for steel buildings and plants. Supplied as a bolted kit, cut to length and marked, ready to fit to the main frame.
Cold-formed C/Z purlins to Z275, steel stairs and platforms with guardrails to EN ISO 14122-3 or OSHA 1910.29, fabricated as a bolted kit.

Purlins, stairs and platforms are the parts of a steel package that are specified last and cause the most site problems. A purlin that is one size too light sags between frames; a stair that is fabricated without checking the handrail standard has to be reworked after installation.

We supply cold-formed Z275 purlins and girts, and steel stairs and platforms fabricated as bolted kits with the guardrail dimensions set by the standard that applies to the project.

Key Specifications

Purlin C/Z section, 1.5 – 3.0 mm, Z275 pre-galvanized
Purlin design GB 50018, EN 1993-1-3, AISI S100
Purlin span 3 – 12 m, with lapped or sleeved continuity where needed
Guardrail height 1,100 mm minimum
Mid-rail Spacing not more than 500 mm
Toe board Required where the platform gap to the adjacent structure exceeds 20 mm
Stair handrail 900 – 1,000 mm above the stair pitch line, grip diameter 25 – 50 mm
Standards EN ISO 14122-3; US projects to OSHA 1910.29 as specified by the client

Fall protection thresholds

Under EN ISO 14122-3 a guardrail is required where the fall height exceeds 500 mm, at 1,100 mm minimum height with the mid-rail no more than 500 mm below the top rail. A platform gap of more than 20 mm to the adjacent structure needs a toe board. US projects follow OSHA 1910.29, which has different dimensions — the standard that governs is stated on the drawing.

Purlin detailing

  • Lapped purlins over the frame give continuity and reduce deflection without increasing the section; the lap length is set in the design.
  • Purlin cleats are welded or bolted to the frame in the shop, so the site only bolts the purlin in place.
  • Anti-sag bars are required on roofs where the purlin compression flange is not restrained by the sheeting.

Stairs and platforms

Stringers, treads, grating and guardrails are fabricated as one transportable unit, trial-fitted, and galvanized or painted as a complete assembly so no cut edges are left unprotected.

Span Purlin span 3 – 12 m
Eave Height Platform levels per project
Structure other
Main Material Z275 pre-galvanized C/Z purlins 1.5 – 3.0 mm, Q235B stair stringers and grating
Application Roof purlin, wall girt, access stair, maintenance platform, equipment platform

What purlin sections and coating do you supply?

Cold-formed C and Z sections, 1.5 to 3.0 mm thick, pre-galvanized to Z275. Girts are supplied in the same coating.

Which design standards are used for purlins?

GB 50018, EN 1993-1-3 and AISI S100. Purlin span is 3 to 12 m, with lapped or sleeved continuity where needed.

Why are purlins, stairs and platforms a common source of site problems?

They are specified last. A purlin one size too light sags between frames, and a stair fabricated without checking the handrail standard has to be reworked after installation.

How are stairs and platforms supplied?

As bolted kits, with guardrail dimensions set by the standard that applies to the project. Guardrail height is 1,100 mm minimum.