Products
Cold Storage Steel Building

Product Category

Keep In Touch With Us

Cold Storage Steel Building

A steel building for frozen and chilled storage that keeps its temperature and its shape. We supply the frame, insulated panels and cold-room details as one package for food and pharma projects.
Insulated cold store steel building with impact-tested steel grades, thermal-break details at every penetration, and a roof designed for the panel and refrigeration loads.

A cold store is a steel frame wrapped in a thick insulated envelope. The frame itself is straightforward; what decides whether the building works is how the envelope, the floor insulation, the refrigeration pipework and the fire compartment walls meet the steel.

We select the steel grade by service temperature rather than quoting a fixed temperature limit: for −20 °C to −30 °C rooms the frame is normally Q355D or S355J2 with Charpy impact testing, and the bolts, welds and coating are specified to match.

Key Specifications

Room temperature −5 °C to −30 °C; lower on request with design review
Steel grade Q355D / S355J2 impact-tested; Q355E for extreme service
Span 18 – 36 m clear span, 8 – 12 m eave
Envelope PIR or rock-wool sandwich panel 100 – 200 mm, vapour barrier on the warm side
Floor Insulated floor slab with heater cables or glycol loop under the freezer
Fire Compartment walls to the roof deck; steel protection matched to the fire strategy

Thermal bridging is the real design problem

  • Every steel member that crosses the insulation line becomes a cold bridge. Columns, roof purlins and the panel rails are detailed with thermal breaks or kept inside the warm envelope.
  • Penetrations for refrigeration pipes, drains and door frames are sleeved and sealed with a vapour-tight detail, not simply foamed.
  • The vapour barrier must be continuous on the warm side; a single gap in a freezer wall becomes an ice block within a season.

Fire strategy

Cold stores combine high fire load, insulated panels and long travel distances. The steel frame is protected by intumescent coating or board to the rating the fire consultant sets, and the panel core is selected to match — PIR for most food stores, rock wool where an A2 non-combustible core is required.

What we need to quote

Room temperatures and sizes, product type and stacking height, the refrigeration system, floor level and dock arrangement, and the fire rating required by the insurer or the local authority.

Span 18 – 36 m
Eave Height 8 – 12 m
Structure portal-frame
Main Material Q355D / S355J2 impact-tested sections, stainless or hot-dip galvanized secondary members
Application Frozen food storage, chilled distribution, pharmaceutical cold room

What temperature range can the cold storage building handle?

Room temperature ranges from -5 C to -30 C. Lower temperatures are possible on request with design review.

Which steel grade is used for cold rooms?

We select the grade by service temperature. For rooms at -20 C to -30 C the frame is normally Q355D or S355J2 with Charpy impact testing, and Q355E is used for extreme service. Bolts, welds and coating are specified to match.

What decides whether a cold store works?

The frame itself is straightforward. What decides the result is how the insulated envelope, the floor insulation, the refrigeration pipework and the fire compartment walls meet the steel.

What clear span is available?

Clear spans are 18 to 36 m.